Custom fireplaces, fireplace and tiled stoves as well as pellet stoves including installation, connection to the chimney and inspection. We design the type according to your house, not the catalogue, and hand it over with the first lighting.
Each variant has a different heat character, different chimney requirements and a different running cost. Choose what interests you or leave the choice to us.
Cast iron and steel wood-burning stoves, output selection based on room size, flue installation, connection to the chimney and inspection. Usually completed within one day.
For: flats and houses with an existing chimney, holiday homes, quick solution without construction work.
Enclosure of fireplace inserts tailored to the room: air-heated, heat-storage or water-heated. Chamotte, calcium silicate, stone or smooth plaster. A single interior element, not a cabinet around the stove.
For: new builds and renovations where the fireplace is to be the room's main feature.
Water-heating stoves or inserts connected to an accumulator tank and radiators or underfloor heating. One fire heats the whole house and warms the water.
For: homes with their own wood supply, as a supplement to a heat pump or boiler.
Radiant heat that lasts long after the fire has burned out. Custom-made stoves, magnesite, chamotte draft system. One to two refuels per day.
For: low-energy homes, bedrooms and living kitchens, lovers of slow heat.
Automatic feed, thermostat, fuel hopper for several days. Heat without carrying wood or morning lighting, even with an exchanger connected to the heating system.
For: households seeking comfort and temperature control, not ritual.
Three ways a fireplace transfers heat into the home. Click to see which rooms it will warm. We select the type based on this, not on appearance.
A warm-air fireplace heats the living room within half an hour. Heat reaches other rooms only through open doors or via a warm air distribution system. It is suitable where you heat in the evening and want a quick effect.
Room, chimney, air supply, floor. Free and without obligation.
Type, output, insert, casing material. Itemised, without estimates.
Inspection or lining, new chimney, penetrations, floor protection.
Stoves installed within a day; custom fireplaces usually ready within a week. Clean installation with extraction.
Flue inspection report, first firing with you, heating instructions.
A detailed description of the steps, chimney and inspection can be found on the page How the process works.
Oversized stoves are covered up and tar the chimney. We calculate the output based on volume, insulation, and your heating habits.
In airtight houses we provide an external air supply; otherwise the fireplace competes with the heat recovery system and extractor hood.
Diameter, draft, condition of the liner. Without a proper chimney, even an expensive liner is just decoration.
We install appliances meeting Ecodesign requirements and build in accordance with ČSN 73 4230 and ČSN 73 4201.
You will receive an itemised quotation after the site survey. We will inform you in advance of the main factors affecting the cost so you know what to ask about.
| Item | What matters |
|---|---|
| Fireplace insert or stove | Performance, material (cast iron, steel, chamotte lining), flat or corner glass, heat exchanger, Ecodesign. |
| Chimney | Existing usable flue, lining, or new stainless steel or system flue and its height. |
| Encasement | Calcium silicate boards and plaster, fireclay and heat-retaining flues, stone, custom-made stoves. |
| Ducting and piping | Hot air ducts to other rooms or connecting the heat exchanger to the tank and system. |
| Construction readiness | Flooring, penetrations, air supply, electrical connections for pellet stoves, site access. |
Yes, every wood or pellet stove requires a flue gas path. It can be connected to an existing chimney (after checking its passability and duct dimensions), or a new stainless steel or system chimney can be installed. We will assess this during the survey.
Before putting a new flue into operation and when replacing an appliance, Decree 34/2016 Coll. Requires an inspection carried out by a certified flue inspector. We will arrange this as part of the job and hand over the inspection report. Subsequent checks and cleaning are usually carried out once a year.
Installation of fireplace stoves including the flue usually takes one day. A custom-built fireplace with a surround typically requires two to five working days depending on the scope, plus technical pauses before the first lighting.
Yes, but with consideration: it requires an external supply of combustion air and lower output to avoid overheating. Often a heat storage fireplace or stove that releases heat slowly is better. We will advise based on the house project.
Stoves are ready-made products installed within a day and can be relocated. A fireplace with an insert is built to fit the room, can be combined with thermal storage or warm air distribution, and forms a permanent part of the interior. The choice depends on the house, budget, and how often you heat.
Yes, we work throughout the country with vetted masonry teams in individual regions. The survey and design will take place at your home.
Just a few details are needed. Within 24 hours on working days we will get in touch with the next step, usually a free survey and chimney inspection. No obligation.
Prefer to call? 775 654 443